Control Panel - Sharp DX-C200 Quick Manual

Names and Locations

Control Panel

1 One Touch buttons
Press to select a scan or fax Quick
Dial destination.
2 [Address Book] key
Press to select a scan or fax destina-
tion from the Address Book.
3 [On Hook Dial] key
Press to use on-hook dialing to check
the destination's status when sending
a fax.
4 [User Tools] key
Press to display the menu for confi gur-
ing the machine's system settings.
5 [Image Quality] key
Press to select scan quality for the
current copy, scan, or fax job.
6 [ID Card Copy] key
Press to enter ID card copy mode for
the current job.
7 [Copy]/[Facsimile]/
[Scanner] key
Press to switch the machine's opera-
tion mode.
8 Selection keys
Press the key that corresponds to an
item shown on the bottom line of the
screen to select it.
6
1 2 3 4 5 6
12 11 10 9
7
8
9 [Density] key
Press to adjust image density for the
current copy, scan, or fax job.
10 [Reduce/Enlarge] key
Press to specify the reduction /en-
largement ratio for the current copy
job, or the document size for the cur-
rent scan job.
11 [Pause/Redial] key
Press to insert a pause in a fax number,
or display the last used scan or fax
destination.
12 [Shift] key
Press to switch between Quick Dial
numbers 1 to 10 and 11 to 20 when
specifying a scan or fax destination
using the One Touch buttons.
CES404