Table of Contents
Advertisement
Using the Copier Function
Advanced Photocopy Settings
❖ Making Enlarged or Reduced Copies
You can specify the reduction or enlargement ratio for the current job. There are two
ways to set the scaling ratio: using a preset ratio or manually specifying a custom
ratio.
1.
Press the [Reduce/Enlarge] key.
2.
Press [Reduce] or [Enlarge], press the [
and then press the [OK] key.
3.
If [Zoom] has been selected, specify the desired ratio using the number keys, and then
press the [OK] key.
❖ Copying Multiple Pages onto One Sheet
•
This function is only available when the original is set in the ADF, not when it is set on the
exposure glass.
•
To use this function, the paper size used for printing copies must be set to A4, Letter, or Legal.
You can set 2-in-1/4-in-1 copy mode for the current job.
1.
Press the [Reduce/Enlarge] key.
2.
Press [Reduce], press the [
on 1].
3.
Press the [
][
key.
The following types of printout format can be selected depending on your preference.
Printout formats for 2-in-1 copying
[Portrait]
Printout formats for 4-in-1 copying
[Portrait: L to R] (Left to Right)
[Portrait: T to B] (Top to Bottom)
][
][
][
] keys to select the desired printout format, and then press the [OK]
CES033
CES035
CES036
][
][
][
] keys to select the desired ratio,
] keys to select [Comb. 2 on 1] or [Comb. 4
[Landscape]
[Landscape: L to R] (Left to Right)
[Landscape: T to B] (Top to Bottom)
CES034
CES037
CES038
9
Hide quick links:
Advertisement
Table of Contents
