Table of Contents
Advertisement
10. Replace the lamp cover and tighten the screw to secure it.
Note: Be sure the lamp cover is securely installed or the lamp will not come on.
11. If you replaced the receiver projector's lamp, tilt the commander projector forward and reattach the
stacking mount angle adjustment screws.
Warning: When you tilt the commander projector forward, be careful not to pinch your fingers in the
mounts.
Reset the lamp timer to zero to keep track of the new lamp's usage.
Parent topic:
Related tasks
Resetting the Lamp Timer
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement
message and to keep track of lamp usage correctly.
Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage
information.
1. Turn on the projector.
Projector Lamp Maintenance
104
Advertisement
Table of Contents
