Table of Contents
Advertisement
9. To prevent unauthorized use of the projector, select Power On Protect, press Enter, select On,
press Enter again, and press Esc.
10. To prevent changes to the User's Logo screen or related display settings, select User's Logo
Protect, press Enter, select On, press Enter again, and press Esc.
11. Press the power button on the remote control.
The commander projector turns off.
12. Wait a few moments, then press the power button on the projector or the remote control.
The commander and receiver projectors turn on and your password security is now enabled.
13. Make a note of the password and keep it in a safe place in case you forget it.
You can attach the Password Protect sticker to the projector as an additional theft deterrent.
Note: Be sure to keep the remote control in a safe place; if you lose it, you will not be able to enter the
password required to use the projector.
Parent topic:
Entering a Password to Use the Projector
If a password is set up and a Power On Protect password is enabled, you see a prompt to enter a
password whenever you turn on the projector.
You must enter the correct password to use the projector.
Password Security Types
66
Advertisement
Table of Contents
