Connecting To A Computer For Vga Video Using Vga Cables And A Splitter - Epson PowerLite W16SK User Manual

2. Connect a VGA computer cable to your computer's monitor port. Then connect the other end of the
cable to the commander projector's Computer1 port.
3. Connect a VGA computer cable between the commander projector's Computer2 port and the
receiver projector's Computer1 port.
4. Change the Monitor Out Port setting in the projector's Extended menu to Monitor Out.
5. Tighten the screws on the VGA connectors.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Related tasks
Connecting to a Computer for Sound

Connecting to a Computer for VGA Video Using VGA Cables and a Splitter

You can connect the projector to your computer using VGA computer cables and a splitter that supports
VGA signals (if necessary).
Note: To connect a Mac that includes only a Mini DisplayPort or Mini-DVI port for video output, you need
to obtain an adapter that allows you to connect to a VGA video port. Contact Apple for compatible
adapter options.
1. If necessary, disconnect your computer's monitor cable.
2. Connect a VGA computer cable to your computer's monitor port. Then connect the other end of the
cable to the splitter.
Connecting to Computer Sources
34