Connecting Up; Connecting The Signal Cable - Eizo FlexScan L771 User Manual

2-2. Connecting the signal cable

• Be sure that the power switches of both the PC and the monitor are OFF.
1.
Remove the rear cover from the monitor.
When removing the rear cover, push down the buttons while pulling.
2.
Plug the signal cable into the D-Sub connector at the rear of the
monitor and the other end of the cable into the video connector on the
PC.
After connecting, secure the connection with the screw-in fasteners.
Power cord
buttons
Signal Cable (enclosed)
Macintosh Adapter (Optional)
Video Output Connector
D-Sub mini 15 pin
·Standard graphics board
·Macintosh G3 (Blue & White) / G4
Video Output Connector
D-Sub 15 pin
Macintosh
2. CABLE CONNECTION
15