Using Channel Return; Using Surflock; Selecting The Video Input To View - Toshiba 47TL515U Owner's Manual

Using Channel Return

You can switch between two channels without entering
a channel number each time. This feature also works for
external inputs.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number
buttons (and the dash (
3
Each time you press
forth between the last two channels that were
tuned.

Using SurfLock

™
The SurfLock ™ feature temporarily memorizes one
channel to the button so it can be quickly returned
to from any other channel. This feature also works for
external inputs.
To memorize a channel to the
1
Tune the channel you want to program to the
button.
2
Press and hold for about 2 seconds until the
message "Memorized" appears. The channel has
been programmed to the
3
You can then change channels repeatedly, and
when you press , the memorized channel will
be tuned.
After pressing and then changing channels again,
the memory is cleared and the button functions as
Channel Return.
Chapter 6: Basic features
) button if needed).
-
, the TV switches back and
button:
button.

Selecting the video input to view

To select the video input to view:
1
Press on the remote control or TV control
panel.
2
Change the input:
Press 0–8.
•
Repeatedly press B or b. Press
•
Repeatedly press
•
Inputs
0 ANT/CABLE ANT/CABLE
1 Video 1
2 Video 2
3 ColorStream HD1
4 HDMI 1
5 HDMI 2
6 HDMI 3
7 HDMI 4
8 PC
Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(- "Labeling video inputs" on p. 32).
• You can skip sources (- "Skipping video inputs" on p.
31).
• Inputs that are set to be skipped will not be available and
will be skipped when selecting inputs by repeatedly
or B or b.
pressing
• You can select inputs that are set to be skipped using the
number buttons.
®
• If one or more HDMI CEC devices are connected to an
HDMI input, the icon (
In this case, the label (- p. 32) will not appear in the
input selector.
• When the Auto Input feature is set, you can select a video
input source with the remote control by pressing and
holding the corresponding MODE SELECT button for 2
seconds (- p. 33).
To select an HDMI ® CEC device:
1
Press B or b to select an HDMI input.
2
Press c. The list of HDMI
input appears.
3
If the input has multiple HDMI
B or b to select a device.
4
Press .
OK
.
O K
.
) appears in the input selector.
®
CEC devices for that
® CEC devices, use
41