Toshiba 47TL515U Owner's Manual page 23

Using 3D functions
3D signals can be sent in one of three formats.
Input Behavior
*
This format cannot be selected manually.
If the right and left images are the same in Native mode,
select SBS.
If the top and bottom images are the same in Native
mode, select TAB.
The 3D button's operation:
The behavior of
0
when viewing in Native mode is
different depending on the input mode.
Digital Broadcast
Analog Broadcast
EJ
[]J
Displays the selection window.
Displays the selection window.
Displays the selection window.
Changes the viewing mode to 2D
to 3D mode.
Displays the selection window.
Changes the viewing mode to 20
to 3D mode.
Changes the viewing mode to 20
to 3D mode.
Images for the left and right eyes
are positioned at the top and
bottom of the screen.
Images for the left and right eyes
are positioned side-by-side.
Two frames of images (one for
the left eye, one for the right eye)
are positioned at the top and
bottom of the screen.
Description
Internet
Analog Inputs
HDMI
Media Player
(Photo, Movie)
Wallpaper
Frame
Packing
(FP)
*
Top and
Bottom
(TAB)
3D format
Side by Side
(SBS)
SWitching display mode or selecting 3D format
There are four modes for watching TV.
Incoming video signals can either be in 20 or 3D
format. A 20 signal can be viewed in either 20 or 3D,
and 3D can be viewed in either 20 or 3D.
If the TV can detect the fact that a signal is 3D, it can
change to 3D mode automatically. Otherwise you can
change the viewing mode using the 3D button. Finally,
the format of the 3D signal can be either Side by Side
(SBS) or Top and Bottom (TAB). You may have to
choose the correct format if the TV can not detect it
automatically - see "selecting 3D format", below.
Moreover, you can change 20 images to 3D images by
pressing the 3D button when viewing in 20.
Note:
• When 30 format signal is not received, display mode is
not switched to 30.
• If appropriate mode and format are not selected, 30
image is not correctly displayed.
• There will be restrictions on the Picture Size settings for
30 Mode and 20 Mode. Only Native can be set.
• There are individual differences in perception of 30
images.
• When viewing 30 images, wear the 30 glasses.
• The 20 to 30 conversion function is activated and
controlled by you according to your personal
preferences.
• The 20 to 30 conversion function is meant for enjoyment
of 20 home video, and other 20 content you create, in
30 according to your personal preferences.
• The 20 to 30 conversion function is not intended for use
with pre-recorded 20 copyrighted content owned by
a
third-party unless the copyright owner has given direct
or indirect permission, or unless applicable law permits
such use.
Mode
3D
Description
Displays 3D images.
Note: When viewing 30 mode
or
20 to 30 mode, pressing
o
changes the viewing mode to Native mode.
20
Displays 20 images by changing 3D
images to 20.
20 to 3D
Displays 3D images by changing 20
images to 3D.
Native
Displays a received signal format as it is.
23