To Use The Backlight/To Use The Channel Return/To Use The Speaker Out/To Display On-Screen Information - Toshiba 20VL66E Owner's Manual

To use the backlight/To use the channel return/To use the speaker out/To display
on-screen information
To adjust the backlight
Your LCD TV set have a bright fluorescent light behind its LCD
panel. The light source, which is called backlight, affects the
brightness of the entire screen. In a darkened room with proper
lighting, we recommend you lower this setting before you begin
adjusting the brightness and contrast. You can always raise it
later if it proves too dim.
Using direction selection button
Press Backlight to display the current backlight mode. To
change the backlight setting. Backlight repeatedly until your
desired mode is selected.
Using the On-Screen Display (OSD) menu
1
Press MENU and press
to highlight the
Special menu.
2 Press P to highlight
Backlight.
3
Press to select the
level of backlight intensity.
Item
Backlight
Bright
To switch between two channels (Channel Return)
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each
time.
1 Select the first channel you want to view.
Select a second channel using the number buttons
2
(0–9).
3
Press . The previous channel will be displayed.
Pressing switches the TV between the last two channels
that were selected.
20VL66E_En_24_26(1)
Special Special
Language Language English English
Color System Color System Auto Auto
Picture Size Picture Size 4:3
4:3
Sleep Timer Sleep Timer 0 Minutes 0 Minutes
Panel Lock
Panel Lock Off Off
Bright
Backlight Backlight Bright
Teletext Setting >
MENU OK EXIT
Special Special
Language Language
English English
Color System
Color System Auto Auto
Picture Size Picture Size 4:3
4:3
Sleep Timer Sleep Timer 0 Minutes 0 Minutes
Panel Lock Off
Panel Lock Off
Bright
Backlight Backlight Power Save
Teletext Setting >
MENU OK EXIT
Setting
High Low
Normal Power Save
25
To select the sound output (Speaker Out)
Your LCD TV provides extra audio output terminal for
delivering audio to an amplifier or other audio devices. Once
connected, you can select the sound output from the
internal speaker or external speaker. See page 9 for details
on connection.
Press MENU and press
1
to highlight the
Audio menu.
Press P to highlight
2
Speaker Out.
Press to select the
3
function On or Off.
Selecting
On
Audio outputs from internal Audio outputs from external
speaker. speaker.
To display on-screen information
Press CALL to display the channel
number or the current input source
selected.
To erase the display, press the
button again.
Pressing CALL can also erase the
OSD menu.
6/28/06, 2:30 PM
Audio
Sound Mode Flat
Balance 0
Sound Type Mono
AVL
Off
Speaker Out
On
Audio Advanced Setting >
Audio Reset
MENU OK EXIT
Audio
Sound Mode Flat
Balance
0
Sound Type
Mono
AVL Off
Speaker Out
On
Audio Advanced Setting >
Audio Reset
MENU OK EXIT
Off
Pr. 12
Stereo
25