Troubleshooting
The date and time are not displayed on the LCD screen.
While shooting, the date and time are not displayed. They are displayed only during playback.
•
Cannot insert dates on image.
The camera does not have a feature for superimposing dates on images (page 113). By using
•
"PMB", you can print or save images with the date (page 87).
The F value and shutter speed flash when you press and hold the shutter
button halfway down.
The exposure is incorrect. Correct the exposure (page 46).
•
The screen is too dark or too bright.
Adjust the brightness of the LCD backlight (page 20).
•
The image is too dark.
•
You are shooting a subject with a light source behind the subject. Select [Metering Mode]
(page 48) or [EV] (page 46).
The image is too bright.
Adjust the exposure (page 46).
•
The image colors are not correct.
Set [Color Mode] to [Normal] (page 54).
•
Adjust the white balance (page 51).
•
White, black, red, purple or other streaks appear on the image, or the image
seems reddish.
This phenomenon is called smearing. This is not a malfunction.
•
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
•
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
Set [Red Eye Reduction] to [On] (page 53).
•
Shoot the subject at a distance closer than the flash range using the flash.
•
Light the room and shoot the subject.
•
Retouch the image using [Red Eye Correction] or with the supplied software "PMB"
•
(pages 59, 87).
109