Adding Variations To The Sound (Reverb) - Yamaha Arius YDP-S51 Owner's Manual

Advanced Operations

Adding Variations to the Sound (Reverb)

This instrument features several Reverb Types that add extra depth and expression to the sound to create a realistic
acoustic ambience. The appropriate Reverb Type and Depth are called up automatically when you select each of the
Voices and Songs. This is why the Reverb Type need not be selected; however, you can change it if desired.
To select a Reverb Type:
While holding down [PIANO/VOICE], press one of the C2–E2 keys.
Lowest key
Reverb Type List
Key Reverb Type
C2 Room
C 2 Hall1
D2 Hall2
D 2 Stage
E2 Off
To adjust Reverb Depth:
While holding down [PIANO/VOICE], press one of the C3–G 4 keys. The Depth value
increases as you press higher keys.
While holding down [PIANO/VOICE], press the A4 key to set the Reverb Depth to the most
suitable value for the current Voice.
18
YDP-S51 Owner's Manual
Selecting a
Reverb Type
C 2 D 2
C2 D2 E2
Description
Adds a continuous reverb effect to the sound, similar to the
acoustic reverberation you would hear in a room.
For a "bigger" reverb sound, use the Hall1 setting. This effect
simulates the natural reverberation of a small-size concert
hall.
For a truly spacious reverb sound, use the Hall2 setting. This
effect simulates the natural reverberation of a large concert
hall.
Simulates the reverb of a stage environment.
No effect is applied.
Adjusting
Reverb Depth
G 4: depth 20
A4
C3: depth 0
The depth value increases as you
press higher keys.
NOTE
In Dual mode (page 20), the
Reverb Type of Voice 1 is
called up. If the Type of Voice
1 is set to Off, the Reverb Type
of Voice 2 is called up and
used for both Voices.
Highest key
Reverb Depth range:
0 (no effect) - 20 (maximum
depth)