2-2. Connecting the signal cable
NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable (enclosed)
Signal Cable (enclosed) +
Macintosh Adapter
(Optional)
Digital Input
FD-C04 (Optional)
NOTE
• The L665 is not compatible with a Power Macintosh G4/G4 Cube ADC (Apple
Display Connector).
Signal Cable
Signal Cable
Connector
•
Video Output
Connector D-Sub
•
mini 15 pin
•
Video Output
Connector D-Sub
15 pin
Connector
Video Output
Connector DVI
2. CABLE CONNECTION
Power Cord
PC
Standard graphics card
Macintosh G3 (Blue & White) /
G4
Macintosh
Power Cord
PC
Digital Graphics card
English
13