Advertisement
YM-410D
ASSEMBLY
For safety, the instrument should be assembled by at least two persons in a loca-
tion with sufficient space.
We recommend to you to assemble the instrument on a soft rug or carpet.
z
Connect the large and the small end legs using the reinforcement stays.
1-1. Place the large and small end legs and reinforcement stays so that they will be positioned as illus-
trated below after assembly.
Stay mount
High sound side
1-2. Connect the reinforcement stays at the center. Align the end of the fixing bolt and the holes in the
reinforcement stays and tighten the fixing bolt securely.
* Insert the support using the reference hole close to the hole for the screw as a guide.
Reinforcement stay
(Small end)
34
Leg (Small end)
Slant shaft
Reinforcement stay
(Small end)
Audience side
Screw hole
Reference hole
Player side
Reinforcement stay
(Large end)
Tighten
Frame end
(Large end)
Leg
(Large end)
Low sound side
Reinforcement stay
(Large end)
Advertisement
