Program Change On/Off; Control Change On/Off - Yamaha P-95S Owner's Manual

Program Change ON/OFF

Normally the P-95 will respond to MIDI program change numbers received from an external key-
board or other MIDI device, causing the same numbered voice to be selected on the corresponding
channel (the keyboard voice does not change). The P-95 will normally also send a MIDI program
change number whenever one of its voices is selected, causing the same numbered voice or pro-
gram to be selected on the external MIDI device if the device is set up to receive and respond to
MIDI program change numbers. This function makes it possible to cancel program change number
reception and transmission so that voices can be selected on the P-95 without affecting the external
MIDI device.
While holding down the
the C#6 key. Pressing the C#6 key repeatedly toggles between Program Change
On and Off.

Control Change ON/OFF

Normally the P-95 will respond to MIDI control change data received from an external MIDI device
or keyboard, causing the voice on the corresponding channel to be affected by pedal and other
"control" settings received from the controlling device (the keyboard voice is not affected). The P-
95 also transmits MIDI control change information when the pedal or other appropriate controls
are operated.
This function makes it possible to cancel control change data reception and transmission so that,
for example, the P-95's pedal and other controls can be operated without affecting an external
MIDI device.
While holding down the
the D6 key. Pressing the D6 key repeatedly toggles between Control Change On
and Off.
and
[DEMO/SONG] [METRONOME]
and
[DEMO/SONG] [METRONOME]
buttons, press
C#6
buttons, press
D6
MIDI Functions
Default setting: ON
NOTE
For information on program
change numbers for each voice,
check the MIDI Data Format on
the web (please refer to "Data
List" on page 7).
NOTE
For information on control
changes that can be used with
the P-95, refer to the MIDI Data
Format section in the Data List,
which can be found at the
Yamaha website (See page 7).
Default setting: ON
P-95 Owner's Manual
27