Changing The Settings Of The Recorded Data - Yamaha P-95S Owner's Manual

Changing the Settings of the Recorded Data

The settings of the recorded data can be changed after the recording.
For example, after recording, you can change the voice to create a different ambience or adjust the
song tempo to your taste.
You can change the following settings.
• Voice selection
• Dual mode voices
• Sustain/soft pedal depth
• Tempo
1.
Press the [REC] button to engage Record Ready
mode.
The [REC] lamp will flash.
2.
Change the settings via the panel controls.
For example, if you wish to change the recorded voice from
, press the
[E.PIANO 2]
damper/soft pedal depth, press and hold the pedal.
Be careful not to press the
which will start recording and erase all previously-recorded data on the selected
part.
3.
Press the [REC] button to exit Record mode.
Be careful not to press the
which will start recording and erase all previously-recorded data.
button. When you wish to change the
[E.PIANO 2]
button or a key on the keyboard, either of
[PLAY]
button or a key on the keyboard, either of
[PLAY]
to
[E.PIANO 1]
Recording Your Performance
P-95 Owner's Manual
23