Recording Your Performance; Recording A Performance; Rec] Button - Yamaha P-95S Owner's Manual

Recording Your Performance

This instrument's recording function enables you to record your performance of one song.

Recording a performance

1.
Make all the initial settings.
Before you begin to record, select the voice you want to record (or voices if you
will be using Dual mode). Make any other desired settings (reverb, tempo, etc.)
as well. You might also want to set the volume.
You can also adjust the playback volume using the
2.
Press the [REC] button to engage Record Ready
mode.
The lamp will flash.
[REC]
You can turn on the metronome in this step, and adjust the tempo by using the
buttons. (Range: 32–280)
TEMPO [ g g g g ]/[ h h h h ]
Record Ready mode can be disengaged before recording by pressing the
button again.
3.
Start recording.
Recording will begin automatically as soon as you play a note on the keyboard
or press the button.
[PLAY]
The lamp will light, and the
[REC]
while recording.
[MASTER VOLUME]
lamp flashes at the current tempo
[PLAY]
Recording Your Performance
NOTE
When the instrument is playing
back a demo song or preset
song, Record mode cannot be
engaged.
slider.
NOTE
Recording capacity
This instrument can record up to
65KB (approximately 11,000
notes).
NOTE
If the metronome was on when
you started recording, you'll be
[REC]
able to keep time with the metro-
nome while recording, but the
metronome sound will not be
recorded.
NOTE
For more recording information,
see page 22.
P-95 Owner's Manual
21