Playing The Keyboard - Yamaha NU1 Owner's Manual

1
Set up the power supply.
1-1 On the bottom surface (page 8), insert the power cord plug into the [AC IN] connector.
AC IN connector
WARNING
Make sure your instrument is rated for the AC voltage supplied in the area in which it is to be used. (The voltage
rating appears on the name plate on the bottom panel). Connecting the unit to an inappropriate AC supply can
seriously damage the internal circuitry and may even pose a shock hazard!
1-2 Insert the plug on the other end of the power cord to a standard AC outlet.
WARNING
• Use only the AC power cord supplied with the instrument. If the supplied
power cord is lost or damaged and needs to be replaced, contact your Yamaha
dealer. The use of an inappropriate replacement can pose a fire and shock haz-
ard!
• The type of AC power cord provided with the instrument may be different
depending on the country in which the instrument was purchased. (In some
areas a plug adaptor may be provided to match the pin configuration of the AC
wall outlets in your area.) Do NOT modify the plug provided with the instru-
ment. If the plug does not fit the outlet, have a proper outlet installed by a qual-
ified electrician.
2
With both hands, hold the hand grip, then lift and
open the fallboard.
CAUTION
• Hold the fallboard with both hands when opening or closing it. Do not
release it until it is fully opened or closed. Be careful to avoid catching
fingers (yours or others, especially children's) between the fallboard
and the unit.
3
Fold down the top of the fallboard, then open the
music rest and put the score on it.

Playing the Keyboard

AC IN
The shape of the plug differs
depending on your locale.
CAUTION
Be careful to avoid catch-
ing your fingers between
the fallboard and the
instrument.
NU1
Owner's Manual
9