Appendix; Message List - Yamaha NU1 Owner's Manual

Appendix

Message
CLr
con
E01
E02
E03
E04
EE1
EEE
End
EnP
FUL
n Y
Pro
UnF
Uoc
UU1
UU2
* When an operation (such as saving or data transfer) is in process, the display shows a sequence of flashing dashes.
* Press any button to exit from these message displays.
30 NU1
Owner's Manual

Message List

Initializing to the default settings.
Displayed when Musicsoft Downloader is started on a computer connected to the instrument. When
this message appears, you cannot operate the instrument.
Displayed when the character code (page 20) is not appropriate for the file name of the Song which
you are selecting. Switch the character code.
Displayed when the data format is not compatible with this instrument, or the data has some other
problems. This Song cannot be selected.
Displayed when no USB flash memory can be found, or a problem has occurred in the USB flash
memory. Disconnect and connect the device again, then execute the operation. If this message
appears repeatedly even when there aren't any other likely problems, the USB flash memory may be
damaged.
Indicates that the USB flash memory is protected.
Displayed when the memory of the USB flash memory becomes full, or the number of files and fold-
ers exceeds the system limit.
Displayed when conversion to audio, Audio Song playback or recording has failed. If you are using a
USB flash memory to which data has already been stored or deleted a number of times, first make
sure that the device does not contain important data, then format it (page 24) and connect to the
instrument again.
A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized dis-
tributor.
A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized dis-
tributor.
Displayed when the current operation is completed.
The memory of the instrument or the USB flash memory is running out. We recommend that you
remove any unnecessary files (page 25) to ensure sufficient memory capacity before start recording.
Since the memory of the instrument or the USB flash memory is insufficient, the operation could not
be completed. If this message appears during recording, the performance data may not be recorded
properly.
Confirms whether each operation is executed or not.
Displayed when you try to overwrite or delete a protected Song or read-only file. Use a read-only file
after cancelling the read-only setting.
Displayed when an unformatted USB flash memory is connected. First make sure that the device
does not contain important data, then format it (page 24).
Communication with the USB flash memory has been shut down because of overcurrent to the USB
flash memory. Disconnect the USB flash memory from the [USB TO DEVICE] terminal, then turn on
the power of the instrument again.
Communication with the USB flash memory has failed. Remove the USB flash memory and make the
connection again. If the message appears even when the USB flash memory is connected properly,
the USB flash memory may be damaged.
This USB flash memory is not supported on this instrument, or too many USB flash memories may
have been connected. Refer to "Connecting USB flash memory" (page 23) for information on the USB
flash memory connection.
Descriptions