Apm Configuration - Asus M4A78T-E - Motherboard - ATX User Manual

3.7.5

APM Configuration

Power
APM Configuration
Restore on AC Power Loss
Power On By PME
Power On By PS/2 Keyboard PS/2 Keyboard
Power On By Ring
Power On By RTC Alarm
Restore On AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
Power On By PME [Disabled]
[Disabled]
[Enabled]
Power On By PS/2 Keyboard [Disabled]
[Disabled]
[Enabled]
Power On By Ring [Disabled]
[Disabled]
[Enabled]
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power On By RTC Alarm [Disabled]
[Disabled]
[Enabled]
3-26
BIOS SETUP UTILITY
[Power Off]
[Disabled] [Disabled]
[Disabled] [Disabled]
[Disabled]
[Disabled]
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Disables the PME to wake up from S5 by PCI/PCIE/onboard LAN devices.
Allows you to turn on the system through a PCI/PCIE/onboard LAN device.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Disables the Power On by a PS/2 keyboard.
Sets specific keys on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
The computer could not be powered up when the external modem receives
a call while the computer is in Soft-off mode.
The computer could be powered up when the external modem receives a
call while the computer is in Soft-off mode.
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date/ RTC Alarm Time will
become user-configurable with set values.
Disabled
Power On
Power Off
Last State
Chapter 3: BIOS setup