How To Operate The On-Screen Menu - Eiki XGA "Diamond" Series LC-XD25 Owner's Manual

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen
Menu. Refer to the following pages regarding each
adjustment and setting procedures.
1
Press the MENU button to display the On-Screen
Menu.
2
Press the Point 7 8
adjust and press the Point
item to adjust.
3
Press the SELECT button to show the item data. To
adjust the data, press the Point
the following pages for each adjustment.
To close the On-Screen Menu, press the MENU button
again.
✔
Note:
The selected item is not active until the SELECT
button is pressed.
buttons to select a Menu icon to
buttons to select an
ed
7 8 buttons. Refer to
Top Control
MENU button SELECT button
Remote Control
SELECT button
On-Screen Menu
Menu bar
Pointer (red framed )
Press the Point
ed
move the pointer.
Item
SELECT
button
Item data
Press the Point
buttons to adjust the
value.
Quit
Exit this menu.
Basic Operation
POINT buttons
(outer ring)
MENU button
POINT buttons
Menu icon
Pointer
(red framed )
buttons to
7 8
21