Installation; Positioning The Projector; Adjustable Foot - Eiki XGA "Diamond" Series LC-XD25 Owner's Manual

Eiki international multimedia projector owner's manual
Hide thumbs Also See for XGA "Diamond" Series LC-XD25:
Table of Contents

Advertisement

Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set horizontally to the flat screen.
Notes:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• The values shown below are approximate and may vary from the actual sizes.
A : B = 6 : 1
8.9' (2.7 m)
3.6' (1.1 m)
40"
Screen Size
(W x H) mm
4 : 3 aspect ratio
Zoom (max)
Zoom (min)

Adjustable Foot

Projection angle can be adjusted up to 10.0 degrees with
the adjustable foot.
Lift the front of the projector and push the foot lock
1
latch on the projector.
2
Release the foot lock latch to lock the adjustable foot
and rotate the adjustable foot to adjust the position and
tilt.
3
To retract the adjustable foot, lift the front of the
projector and push and undo the foot lock latch.
Keystone distortion of the projected image can be
corrected by menu operation. (p.23, 47)
32.8' (10.0 m)
26.9' (8.2 m)
17.7' (5.4 m)
13.4' (4.1 m)
150"
100"
123"
81"
40"
100"
813 x 610
2032 x 1524
3.6' (1.1 m)
8.9' (2.7 m)
4.3' (1.3 m)
10.8' (3.3 m)
300"
200"
246"
162"
150"
200"
3048 x 2286
4064 x 3048
13.4' (4.1 m)
17.7' (5.4 m)
16.4' (5.0 m)
22.0' (6.7 m)
Foot Lock Latch
(Inch Diagonal)
Max . Zoom
Min . Zoom
A
(Center)
B
300"
6096 x 4572
26.9' (8.2 m)
32.8' (10.0 m)
Adjustable Foot
1

Advertisement

Table of Contents
loading

Table of Contents

Save PDF