ViewSonic Pro8600 User Manual page 43

• General Setup: Allows you to turn on/off the projector, switch the input signal for
the projector, and change the password for the Administrator page.
• Picture Setup/Image Setup: Provides some OSD menu items for adjusting the
projected pictures. See
• Alert Setup/Mail Setup: Allows you to setup the mail server and send system
error messages to your ITS administrator.
• Network Setup: Provides wired and wireless network settings.
• Reset to Default: Allows you to restore the device to the factory default settings.
About Crestron control
The Crestron (eControl) page displays the Crestron eControl user interface. The eControl
page provides a variety of virtual keys to control the projector or adjust the projected
pictures.
You can press
/ to reveal
more buttons.
i. These buttons function the same as the ones on the OSD menus or remote
control.
ii. To switch between input signals, click on your desired signal.
iii. To change the language for the Crestron page, click the down arrow to reveal a
drop down list and select a desired language.
Important
•
The Menu button can also be used to go back to previous OSD menus, exit and save
menu settings.
•
The source list varies according to the connectors available on the projector.
•
When you use the projector control panel or remote control to change the OSD menu
settings, it may take a while for the web browser to synchronize these changes with the
projector.
"Menu Operation" on page 23
i
ii
36
for details.
i
i
iii