Initial Screen; The Login Screen; Command Syntax Conventions - ZyXEL Communications Dimension GS-4024 User Manual

Hide thumbs Also See for Dimension GS-4024:
Table of Contents

Advertisement

GS-4012F/4024 User's Guide

42.2.1.1 Initial Screen

When you turn on your switch, it performs several internal tests as well as line initialization.
You can view the initialization information using the console port. After the initialization, the
login screen displays (refer to
Copyright (c) 1994 - 2006 ZyXEL Communications Corp.
initialize mgmt, ethernet address: 00:13:49:00:00:01
initialize switch, ethernet address: 00:13:49:00:00:02
Initializing switch unit 0...
Initializing VLAN Database...
Initializing IP Interface...
Initializing Advanced Applications...
Initializing Command Line Interface...
Initializing Web Interface...
Press ENTER to continue...
Use the following steps to telnet into your switch.
1 For local management, connect your computer to the RJ-45 management port (labeled
MGMT) on the switch.
2 Make sure your computer IP address and the switch IP address are on the same subnet. In
Windows, click Start (usually in the bottom left corner), Run and then type
192.168.0.1
3 A login screen displays (refer to

42.3 The Login Screen

After you have successfully established a connection to the switch using a direct console
connection or Telnet, a login screen displays as shown below. For your first login, enter the
default administrator login username "admin" and password "1234".

42.4 Command Syntax Conventions

The rules of the commands are listed next.
• The command keywords are in
• The required fields in a command are enclosed in angle brackets <>, for instance,
means that you must specify an IP number for this command.
<ip>
• The optional fields in a command are enclosed in square brackets [], for instance,
configure snmp-server [contact <system contact>] [location <system
location>]
254
Section 42.3 on page
(the default management IP address) and click OK.
Section 42.3 on page
Enter User Name : admin
Enter Password : XXXX
courier new font
254).
254).
.
Chapter 42 Introducing Commands
telnet
ping

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs-4012f

Table of Contents