ZyXEL Communications Dimension GS-4024 User Manual page 311

GS-4012F/4024 User's Guide
where
port-access-authenticator
port-access-authenticator
<port-list>
reauthenticate
reauth-period <reauth-
period>
An example is shown next.
• Specify RADIUS server 1 with IP address 10.10.10.1, port 1890 and the string secretKey
as the password. See
commands.
• Specify the timeout period of 30 seconds that the switch will wait for a response from the
RADIUS server.
• Enable port authentication on ports 4 to 8.
• Activate reauthentication on the ports.
• Specify 1800 seconds as the interval for client reauthentication.
sysname(config)# radius-server host 1 10.10.10.1 acct-port 1890 key
--> secretKey
sysname(config)# radius-server timeout 30
sysname(config)# port-access-authenticator
sysname(config)# port-access-authenticator 4-8
sysname(config)# port-access-authenticator 4-8 reauthenticate
sysname(config)# port-access-authenticator 4-8 reauth-period 1800
310
= Enables port authentication on the switch.
= Specifies which ports require authentication.
= Enables reauthentication on the port.
= Specifies how often a client has to re-enter his or her
username and password to stay connected to the port.
Section 44.8.1 on page 308 for more information on RADIUS server
Chapter 44 Configuration Mode Commands