Table of Contents
Advertisement
6. Configurations with Browser
User PIN code
With this screen, you can set the User PIN code to transfer the image to the projector and to
activate PJ Controller.
You can set different PIN code as you set for Admin Password (p.49).
When you reset the User PIN code, you do not need to enter the current PIN code.
At the factory setting, the User PIN code is not set.
If you do not need to set a PIN code, enter
Parameter
Enter New User
Re-enter New User
APPLY button ..................................Click the APPLY button to update. The screen to restart the projector will be
50
Description
PIN code
..........Enter a new
entered is displayed as "●●●●" (four-digit numbers).
PIN code
........Re-enter the new
entered is displayed as "●●●●" (four-digit numbers).
displayed.
"
"
0000
.
PIN code
you wish to set. The
PIN code
you wish to set. The
PIN code
you have
PIN code
you have
Advertisement
Table of Contents
