Table of Contents
Advertisement
Service
Items on this screen are used for maintenance of the projector.
Save Actual Adjustment
On this screen, you can save and load the setting. The items you can save are as follows: Input,
PC adjustment, System Adjustment, Image Adjustment, Screen and Setting.
✳
The figure shows only a part of the full screen.
10. How to Use the PJ Controller
Parameter
Description
Display scanning system of video signals.
"No items are shown in the current input mode" will be
displayed in other signals.
✳
If you select Wired, Wireless Computer1 (Analog/Digital)
or Computer 2 (RGB) for the input source, these items
are not shown.
1. Confirm the actual adjustment
When you click Save icon in the Control Menu,
the "Save Actual Adjustment" screen will
appear. Check each setting. (Go to the next
page.)
87
Advertisement
Table of Contents
