•Load transparencies in the manual tray with print side up,
and the top with the adhesive strip going first.
Notes:
• To prevent transparencies from sticking to each other, do not let
the printed sheets stack up as they are printed out.
• Place transparencies on a flat surface after removing them from
the printer.
• Do not use transparencies that are separating from the backing
sheet.
•Load card stock with print side up, short edge first and
center of the manual tray.
If you experience jams with card stock feeding, turn
Notes:
the paper around and try again.
U
P
M
SING
RINT
ATERIALS
3
3.9