Table of Contents
Advertisement
Quick Links
Introducing the FireWire+Hi-Speed USB
ExpressCard
The FireWire+Hi-Speed USB ExpressCard adds FireWire
and high-speed USB 2.0 interfaces to your notebook
computer.
Key Features and Benefits
•
Adds FireWire 400 & Hi-Speed USB 2.0 ports to
your ExpressCard equipped PC notebook or
desktop computer for external drive connections
•
Works with USB (2.0 & 1.1) devices including
cameras, scanners, CD/DVD & hard disk drives,
memory card readers, and FireWire devices such as
DV camcorders, FireWire hard disk drives, digital
cameras, scanners, CD-RW/DVD drives, video
games system, & other audio/video devices
•
Compliant with IEEE 1394-1995, P1394a-2000, and
OHCI Interface Specification 1.1
•
Compliant with USB specification, revision 2.0
•
Hot-swapping allows you to connect/detach
FireWire/USB devices without first turning your
system off
•
Can be installed in an ExpressCard/34 or /54 slot
Note: USB 1.1 devices are limited to USB 1.1 speeds
even when they are connected to USB 2.0 host adapter
or USB 2.0 hubs.
04-0439B
FireWire+Hi-Speed USB
ExpressCard
Quick Installation Guide
1
Advertisement
Table of Contents
Related Manuals for SIIG NN-000032-S1
Summary of Contents for SIIG NN-000032-S1
- Page 1 FireWire+Hi-Speed USB ExpressCard Quick Installation Guide Introducing the FireWire+Hi-Speed USB ExpressCard The FireWire+Hi-Speed USB ExpressCard adds FireWire and high-speed USB 2.0 interfaces to your notebook computer. Key Features and Benefits • Adds FireWire 400 & Hi-Speed USB 2.0 ports to your ExpressCard equipped PC notebook or desktop computer for external drive connections •...
-
Page 2: System Requirements
Note: For devices that require more power than provided by both ports, an optional power adapter can be purchased from SIIG online store. Most USB or FireWire devices do not need this optional power adapter to work. However, if your device does not work properly or you experience poor performance, the power supply is recommended. -
Page 3: Hardware Installation
Hardware Installation General instructions for installing the card are provided below. Since the design of systems may vary, refer to your system’s reference manual for further information, if needed. Insert the card into the ExpressCard slot of your system. Make sure it is inserted all the way in for a solid connection. Driver Installation Windows will automatically detect and install the correct driver for this board. - Page 4 Blank Page...
- Page 5 Blank Page...
- Page 6 Blank Page...
-
Page 7: Technical Support And Warranty
Step 1: Submit your RMA request. Go to www.siig.com, click Support, then RMA to submit a request to SIIG RMA. If the product is determined to be defective, an RMA number will be issued. SIIG RMA department can also be reached at (510) 413-5333. - Page 8 6078 Stewart Avenue Fremont, CA 94538-3152, USA FireWire+Hi-Speed USB ExpressCard is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other names used in this publication are for identification only and may be trademarks of their respective companies.