Advertisement
FireWire 800 CardBus Dual
Quick Installation Guide
Introducing the FireWire 800 Cardbus Dual
The FireWire 800 Cardbus Dual is designed to add FireWire
interface to your notebook computer.
Features and Benefits
Provides 1 FireWire 800 (9-pin) and 1 FireWire 400
•
(6-pin) ports for multiple device connections
Works with FireWire (1394a/b) devices including
•
DV camcorders, digital cameras, CD-RW/DVD-
ROM drives, portable hard disks and other audio/
video devices
Ulead VideoStudio DV editing software provides
•
exciting digital video capturing, editing and
exporting capabilities
System Requirements
Pentium or equivalent notebook PC with an
•
available Cardbus PC Card slot
Windows 98SE/ME/2000/XP/Server 2003
•
Recommended system for DV editing
Pentium III or above PC computer
•
128MB RAM and 4GB hard disk space
•
Package Contents
FireWire 800 CardBus Dual
•
Driver CD & Ulead VideoStudio DV editing software
•
FireWire (6-/4-pin) cable and quick installation
•
guide
04-0426A
1
Advertisement
Table of Contents
Related Manuals for SIIG NN-8CB212-S1
Summary of Contents for SIIG NN-8CB212-S1
- Page 1 FireWire 800 CardBus Dual Quick Installation Guide Introducing the FireWire 800 Cardbus Dual The FireWire 800 Cardbus Dual is designed to add FireWire interface to your notebook computer. Features and Benefits Provides 1 FireWire 800 (9-pin) and 1 FireWire 400 •...
-
Page 2: Hardware Installation
However, non-powered FireWire devices require this optional power adapter to work. The power adapter can be purchased at SIIG's Online Store. Hardware Installation General instructions for installing the card are provided below. Since the design of notebook computers may vary, refer to your system’s reference manual for further... -
Page 3: Software Installation
Software Installation This section provides information on how to install the FireWire 800 CardBus Dual driver/software. Windows 98SE At the Add New Hardware Wizard, click Next. Select Search for the best driver for your device (Recommended), then click Next. Insert the driver CD, check CD-ROM drive, uncheck the other boxes, then click Next. - Page 4 Right click My Computer, click Manage, then click Device Manager. Double click IEEE 1394 Bus host controller, then double click Texas Instruments OHCI Compliant IEEE 1394 Host Controller. Click the Driver tab, then Update driver button. At the Upgrade Device Driver Wizard window, click Next.
- Page 5 Select Don't search. I will choose the driver to install, then click Next. Insert the driver CD, click Have disk. Type in D:, then click OK. (Change D: to match your CD-ROM drive letter) Select OHCI IEEE 1394b Host Controller, click Next. If prompted, click Continue Anyway.
-
Page 6: Connecting A Dv Camcorder
Follow the on-screen instructions to complete the installation. Note: For instructions on how to use Ulead VideoStudio, please refer to VStudio.pdf file located in the Document\Manual directory on the Ulead VideoStudio DV editing software CD. Connecting a DV Camcorder Before setting up the digital video camcorder, verify the FireWire 800 CardBus driver has been successfully installed in your system, then follow the procedures below. -
Page 7: Technical Support And Warranty
This product comes with a lifetime manufacturer warranty. Please see SIIG website for more warranty details. If you should happen to have any problems with this product, follow the procedures below. A) If it is within the store's return policy period, please return the product to the store where you purchased from. - Page 8 6078 Stewart Ave. Fremont, CA 94538-3152 FireWire 800 CardBus Dual is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in this publication are for identification only and may be trademarks of their respective companies.