However, non-powered FireWire devices require this optional power adapter to work. The power adapter can be purchased at SIIG's online store, part # NN-ADA011. Hardware Installation General instructions for installing the card are provided below.
Driver Installation This section provides information on how to install the FireWire 800 1-Port ExpressCard/34 drivers. Windows 2000 Windows 2000 automatically installs it's built-in FireWire 400 driver for the FireWire 800 1-Port ExpressCard/34. To get the full speed out of this controller, install the Firewire 800 driver using the directions below.
Page 4
At the License Agreement screen, click Yes. Type in your customer information, then click Next. At the Destination Location screen, click Next. Select Complete, then click Next. At Program Folder screen, click Next. At the Hardware Installation screen, click Continue Anyway three times, then click Finish.
Page 5
Windows Vista Windows Vista automatically installs it's built-in FireWire 400 driver for the FireWire 800 1-Port ExpressCard/34. To get the full speed out of this controller, install the Firewire 800 driver using the directions below. Insert the driver CD. Click Start, Run. Type D:\setup.exe, click OK.
To Verify Mac OS Installation Check System Profiler to verify successful installation. Click Go, then Utilities. Double click System Profiler. Click FireWire and another FireWire Bus should be displayed. Removing the ExpressCard Stop the ExpressCard before removing it from the ExpressCard slot.
Connecting Devices General driver installation steps are provided below. Please review your device's user manual for more details. Windows 2000 At the Found New Hardware Wizard, click Next. Select Search for a suitable driver..., then click Next. Uncheck all check boxes, then click Next. Click Next, then click Finish.
Page 8
Windows Vista Windows Vista will automatically detect and install most FireWire devices when connected. However, for devices that do not install automatically, follow the steps below to complete the installation. Click Locate and install driver software. Click Continue to complete the installation. Mac OS Mac OS will automatically detect and install most FireWire devices when connected.
Page 9
Windows will display an information box when the driver is ready for use. It may take a few seconds for this box to appear. Note: To switch back to the FireWire 800 driver, follow the same procedures, but in step 3 instead of clicking on Microsoft 1394 Drivers, click on Unibrain 1394 Drivers.
This product comes with a lifetime manufacturer warranty. Please see SIIG website for more warranty details. If you should happen to have any problems with this product, follow the procedures below. A) If it is within the store's return policy period, please return the product to the store where you purchased from.
Page 12
Fremont, CA 94538-3152 FireWire 800 1-Port ExpressCard/34 is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Mac and Mac OS are registered trademarks of Apple Computer, Inc.