Placing And Deleting An Event - Raytheon RayChart 620 Operation Manual

Chapter 4: Additional Basic Functions 35
D3829-1
4. Position the cursor at the point where you wish to place the mark.
5. Press the PLACE MARK soft key to place the new mark at the
cursor position.
6. Press EXIT or CLEAR to return to the default screen.
To delete a mark:
1. Press the MARK key, to display the Mark soft key labels.
2. Position the cursor over the mark you wish to delete.
3. Press the DELETE MARK soft key to delete the mark.
4. Press EXIT or CLEAR to return to the default screen.

Placing and Deleting an Event

The procedure for placing an event is the same as for placing a mark,
except that you use the EVENT key and the event is always placed at
the vessel's position (which must be in view). The event is marked with
an event name in addition to the event symbol.
The procedure for deleting an event is the same as for deleting a mark,
except that, since events are special waypoints, you are prompted to
confirm the deletion.