Editing Route Information - Raytheon RayChart 620 Operation Manual

Chapter 3: Controlling the Chart and Using the Default Soft Keys
2. Press the ADD WPT soft key. The line changes from a solid line to a
3. Move the cursor to the required position. Dotted lines connect the
4. Press ENTER. The new waypoint is placed, and named with the

Editing Route Information

Once you have created a route, you can edit the route information,
including the route name and the waypoint names, symbols and
positions.
To edit the route information for the currently selected route:
1. Press the EDIT soft key from the MAKE/EDIT screen of the ROUTE
dotted line. (If the RayChart beeps instead, move the cursor closer
to the line and press ADD WPT again.)
cursor to the two existing waypoints.
first available waypoint number.
menu.
A summary of the current route is displayed on the screen, and the
soft key labels change, as shown in the following example.
The route name is shown at the top of the route summary. For each
waypoint you placed, the following information is given:
27