Appendix D: Status Messages - Polycom SoundStation IP 3000 Administration Manual

Appendix D: Status Messages

This section summarizes the messages that
are displayed on the SoundStation IP 3000.
Message
Polycom, Inc. Copyright 2001
Initialization in Progress
Obtaining IP Address
(Press Menu to Re-configure)
Starting Application.
Please Wait ...
Updating ...(%) done
DO NOT POWER OFF
Updating ...100% done
Rebooting
Please wait ...
Restarting
Please wait ...
Bad Checksum in update file
USING EXISTING VERSION
Bad Checksum in update file
(Press Menu to Configure)
File not found on TFTP Server
USING EXISTING VERSION
File not found on TFTP Server
(Press Menu to Configure)
Error in Version ID
USING EXISTING VERSION
Error in Version ID
(Press Menu to Configure)
Direct IP Call only
Retrying (in top right of screen)
Service is Unavailable
No Nwk (in top right of screen)
21
Phone State
About 15 seconds after power up
After Power up and during boot load
When DHCP is initiated or while Static IP is
being configured
While the application is being loaded.
During update process
After update is complete
SoundStation IP 3000 is rebooting
Resting state or in Menu
During update via Auto Configuration
During manual update
During update via Auto Configuration
During manual update initiated via menus.
During update via Auto Configuration
During manual update initiated via menus
During normal operation
During normal operation
Notes
This message will be displayed while the
boot code is loading. A bong will also be
heard before the actual DHCP Discovery
process is started.
This message is also displayed while auto
configuration is in progress.
After contacting the TFTP server,
SoundStation IP 3000 will automatically
update. This message will also occur when
update is locally initiated.
Due to configuration change or after
update.
When manual restart is initiated.
The bin file is downloaded from TFTP
server, then a checksum is calculated
and checked. If the checksum fails,
this message is displayed.
The bin file is downloaded from TFTP
server, then a checksum is calculated
and checked. If the checksum fails,
this message is displayed.
The bin file is requested from the TFTP
server. If that file is not available,
then this message is displayed.
The bin file is requested from the TFTP
server. If that file is not available,
then this message is displayed.
Displayed when the Software update file
supplied via TFTP doesn't match what is
expected by the Software.
Displayed when the Software update file
supplied via TFTP doesn't match what is
expected by the Software.
Displayed when the unit is configured to,
but not able to register with a gatekeeper.
Displayed when the unit has lost
connectivity with the Ethernet network.