Disabling Auto Configuration; Using The Phone In Static Ip Mode - Polycom SoundStation IP 3000 Administration Manual

Disabling Auto Configuration

Auto Configuration can be disabled.
Disabling Auto Configuration must be
done on the phone and applies to that
device only. Disabling Auto Configuration
means that the SoundStation IP 3000
will not use the configuration file from
the TFTP server. Instead, the phone will
use the parameters that are already on
Disabling Auto Configuration
Press the Menu Key.
1
2
Scroll down to Admin Setup
and press Select.
3 Enter the Administrator Password
(default is
4 In the Admin Menu choose
Network Setup and press Select.
5
Scroll down to Auto Configuration
option and choose No and press
6 Change other options (Gatekeeper
address, User ID, Local #, etc.)
as necessary.
7 Press Exit.

Using the Phone in Static IP Mode

If the phone is set to operate with a static
IP address, a TFTP server address must
12
** #).
the device. If no new parameters are
configured, it will use the parameters last
obtained from the TFTP server.
Follow the process described below to
disable Auto Configuration (either through
the LCD on the phone or via the web).
Disabling Auto Configuration
Via Web Browser
Launch a browser on a device that
can communicate with the
SoundStation IP 3000.
1
Enter the IP address of the
SoundStation IP 3000 in the
URL field and press enter.
2 Logon as a administrator by
entering the administrator password
Save
.
(default is
3
In the left pane, click Setup.
4
Scroll down to Auto Configuration
Usage and choose No. Change other
options (Gatekeeper address, User ID,
Local #, etc.) as necessary.
5 Click Set at the bottom of the page.
be manually configured so the Automatic
Configuration option is possible.
#) and click Login.
**