Reassembling The Computer - Compaq Presario 6500 - Desktop PC Getting Started

Reassembling the Computer

1. Replace the front bezel by following the
method appropriate for your computer model.
❏ To replace the front bezel on the
6000 model, position the chassis in the
upright position. At an angle, align the top
of the front bezel with the top slots of the
chassis 1 so that the front bezel hooks
onto the chassis, and then press the bottom
end of the bezel to the chassis until it snaps
into place 2.
Getting Started
Upgrading the Computer
Replacing the Front Bezel on the 6000 model
8–27