Optical Mouse
Symptom
Mouse does not work
after installation or is
not detected.
Mouse does not track
cursor well.
Getting Started
Problem
Mouse is not connected
properly.
The optical sensor uses
the pattern of the surface
to track the position of the
cursor. Reflective surfaces,
grooved surfaced, glass,
or other see-through surfaces
inhibit the ability of the
sensor to track the cursor.
Solution
Try unplugging and then reconnecting the mouse cable
to your computer. The mouse cable goes into the
computer's PS/2 port.
Place the mouse on a mousepad or white sheet of
paper.
Finding Help & Support
7–25