Carpet Height Adjustment; Tools; Select Proper Tool - Hoover UH30600 Owner's Manual

HANDLE POSITIONS
2.6 The handle of your
cleaner has two
positions: 1) Upright for
storage and when using
cleaning

tools.

Operating position for
general operation on
carpets and floors.
Step on handle release
pedal to lower handle.

CARPET HEIGHT ADJUSTMENT

2.8
Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas.
The vacuum is ready for tool use when handle is in upright position.

SELECT PROPER TOOL

(Tools may vary per model)
3.1
A
C
D
2.6
2) 2
A
B
TRANSPORTING CLEANER
2.7 To
cleaner from room to
1 room, put handle in
upright
cleaner back on rear
wheels
forward.
2.8 To adjust height setting, PUSH DOWN and
TURN knob (A) to desired height setting.
For maximum cleaning performance, the following
carpet height settings are recommended:
where easier pushing effort is desired, while
maintaining good cleaning performance.
If the vacuum is difficult to push, push down and
turn knob to the next higher setting.
3. TOOLS
A. Use Dusting Brush to clean upholstered furniture,
draperies, mattresses, clothing, and carpeted stairs.
(Tool varies per model)
B. Air-Powered Hand Tool may be used for upholstered
furniture, draperies, mattresses, clothing, and
carpeted stairs. (Tool varies per model)
C. Telescoping Wand is used to give extra length
to your hose. Use it with any of the above tools.
D. Crevice Tool may be used in tight spaces,
corners and along edges in such places as
dresser drawers, upholstered furniture, stairs and
baseboards.
7 Actual model may vary from images shown.
2.7
move your
position, tilt
and push
IMPORTANT
CAUTION
!
Not to be used for grooming a pet.
!