Removing Hose; Attach Wand And Tools; Stair Cleaning; How To Clean Tools - Hoover UH30600 Owner's Manual

REMOVING HOSE

When using cleaning
tools, place cleaner han-
dle in the upright posi-
tion. The agitator brush-
roll will not rotate when
the cleaner is in the
upright position.
3.2 To remove Hose for
tool use, press the Hose
Release Button and pull
Hose end out.
To lock back into place,
push Hose into Hose
Tube until you hear a
click.
CAUTION
!
To reduce the risk of personal injury from moving
parts, unplug vacuum before servicing.

STAIR CLEANING

3.4 Lift vacuum by Stair Cleaning Handle and
position on stairs. Clean forward to back. Never leave
the vacuum standing on stairs when not cleaning.
3.5 Use the Hose and Powered Hand Tool
(Tool varies per model) for stair cleaning. Always
ensure handle is in upright position.
Use extra care when cleaning on stairs. To avoid personal injury or damage, and to prevent the cleaner
from falling, always place cleaner at bottom of stairs on floor. Do not place cleaner on stairs or furniture,
as it may result in injury or damage. When using tools, always ensure handle is in upright position.
HOW TO
CLEAN TOOLS
To clean Hose and
Powered Hand Tool,
wipe with a damp cloth.
DO NOT submerge in
water.
Other cleaning tools
may be washed in
warm water with a
detergent. Rinse and
air dry completely
before using.
Actual model may vary from images shown.
3.2
!
CAUTION
!
BAG CHECK INDICATOR
The indicator (L) will begin to show red as the
filter bag fills with dirt. There are three conditions that
will cause the indicator to become completely red:
1. If the bag is full; change the bag.
2. If very fine materials have been picked up,
clogging the bag pores; change the bag.
3. If there is a blockage in the nozzle, hose,
tools or at the bag opening; remove
the blockage.

ATTACH WAND AND TOOLS

(Tools may vary per model)
3.3 Attach tool or wand
to the hose (A).
Attach tool to wand (B)
by pushing it firmly
onto the wand.
Twist wand or tool
slightly to tighten or
loosen the connection.
To extend wand, twist
counter-clockwise
the unlocked position,
extend wand & twist
clockwise until tight.
Reverse to collapse.
WARNING
!
Unplug vacuum before connecting Air-
Powered Hand Tool.
3.4
!
8
3.3
A
B
to
!
3.5
3.6
L