Eiki EIP-5000L Setup Manual page 43

1
Access one of the four projectors
via Internet Explorer.
(See "Controlling the Projector Using Internet
Explorer (Version 5.0 or later)" (page 23) for
the details.)
2
Click "Video Wall" on the menu.
• "Video Wall" display will appear.
3
Select "2 X 2" on "Division".
1
2
3
1 1 1 1 1 Selects a position for each projector. (the assigning buttons)
2 2 2 2 2 Selects a number of positions where the video wall is divided.
3 3 3 3 3 Displays the current status for the video wall setup.
4 4 4 4 4 Adjusts the position of the projected image horizontally and vertically.
Video Wall Projection
4
Click the assigning button for the
desired position.
• The projector will be assigned to the part of
the video wall.
Note
• For more details on the assigned position
and the actual position of the projector, see
"Assigning the Projected Image on the
Video Wall Setup" (page 44).
5
Repeat the same procedure from
the step 1 to 4 for the other three
projectors.
That completes the video wall setup. When
the same image signal is input to all the
projectors, the video wall projection starts.
4
43