To Change The Power Outage Setting - Honeywell W8735B Owner's Manual

To Change the Power Outage Setting

After you enter Configuration Number 10, if your Power
Outage Setting is set to the factory setting, you hear,
"The Power Outage Setting is one."
If your Power Outage Setting is correct, press the * key
to return to the Configuration Menu.
"To change the Power Outage Setting, press 1." "Enter
the Power Outage Setting followed by the # key."
1. Enter a Power Outage Setting from one to four
hours. You will hear, "Your Power Outage Setting
is (your Power Outage Setting)."
2. If this is the Power Outage Setting you want pro-
grammed, press the * key to return to the Config-
uration Menu.
If the Power Outage Setting is not entered correctly, you
will hear, "Invalid Setting."
Follow the menu and these instructions and enter a new
Power Outage Setting.
23 69-1353