Honeywell W8735B Owner's Manual page 21

When these telephone number
settings are programmed
#1 or #2 - Telephone Access Module
dials-out to announce the alert.
#1 and #2 - Telephone Access Module
dials-out to announce the alert.
a
#3 - Telephone Access Module
dials-out to announce the alert.
a
#1 or #2, and #3 - Telephone Access
Module dials-out to announce the
alert.
a
#1, and #2, and #3
Access Module dials-out to announce
the alert.
a
Telephone #3 setting is intended for use when you have an agreement with your heating and air conditioning con-
tractor to monitor the alerts generated by your Telephone Access Module.
b
The contractor uses a special code (last five digits of the telephone number 3 setting) to clear the alert. This code
does not clear the alert dial-out to telephone #1 or #2 number settings and only allows the contractor access to clear
the alert.
Table 4. Dial-Out Procedure.
Alert is cleared.
Alert is cleared if either #1
or #2 acknowledges the
alert.
Alert is cleared.
Alert is cleared if either #1
or #2 acknowledges the
alert.
Alert sent to #3 will be
cleared once
acknowledged by #3
Alert is cleared if either #1
- Telephone
or #2 acknowledges the
alert.
Alert sent to #3 will be
cleared once
acknowledged by #3
Acknowledged
b
b
b
21
Not Acknowledged
Dial-out procedure is attempted every 30
minutes until the alert is acknowledged.
Dial-out procedure is attempted to #1
and #2 every 30 minutes until the alert is
acknowledged by either #1 or #2.
Dial-out procedure is attempted every 30
minutes until the alert is acknowledged
by #3.
Dial-out procedure is attempted to #1 or
#2 every 30 minutes until the alert is
acknowledged by either #1 or #2.
Dial-out procedure is attempted to #3
every 30 minutes until the alert is
acknowledged by #3.
Dial-out procedure is attempted to #1
and #2 every 30 minutes until the alert is
acknowledged by either #1 or #2.
Dial-out procedure is attempted to #3
every 30 minutes until the alert is
acknowledged by #3.
69-1353