Honeywell W8735B Owner's Manual page 11

ROOM TEMPERATURE
You will hear, "The room temperature is (__degrees)." or
(__ degrees)."
Or if you have named the zones:
ZONING
Great Room) temperature is (___
degrees)."
The Telephone Access Module receives the thermostat
room temperature and provides that information when
you call in.
The thermostat always provides
the room temperature of the last
zone queried. You can hear each
thermostat room temperature by
ZONING
changing zones. See Changing to
Hear Another Zone section.
CHANGING THE TEMPERATURE SETTING
You will hear, "The heat (cool) setting is (__degrees)." or
"The (emergency) heat setting is
(__degrees)."
HEAT PUMP
"The zone (1-9) temperature is
"The zone name (for example,
ZONING
The Telephone Access Module announces the system
mode, then announces the current temperature setting,
and then prompts you to change the temperature
setting:
"The system mode is (heat, cool, off, auto, emergency
heat."
• If the thermostat is set to the heat mode, you
will hear: "To change the heat setting, press
1."
• If the thermostat is set to the cool mode, you
will hear: "To change the cool setting, press
2."
• If the thermostat is set to the auto mode, you
will hear: "To change the heat setting, press 1;
to change the cool setting, press 2."
HEAT PUMP
• If the thermostat is set to the off mode, you will
hear, "To change the system mode, press 3."
11
"The zone 1 (1-9) setting is (__
degrees)."
or if you have named the zones:
"The zone name (for example,
Great Room) heat (cool) setting is
(__ degrees)."
•If the thermostat is set to the
emergency heat mode, you will
hear: "To change the emergency
heat setting, press 1."
The thermostat must be in a
mode other than off to change
the heat or cool settings.
69-1353