Table of Contents
Advertisement
If the Zone ID Number is not
entered correctly, you will hear,
"Invalid ID." Follow the menu and
these instructions and enter a
ZONING
new Zone ID Number.
You will hear, "Zone one is the Great Room (if you
entered Zone ID Number 8, for example); to hear
another zone, press 1."
3.
If your setting is correct, press 1 to hear the next
zone.
4.
Repeat the steps 1-3 to enter a zone name for
each zone.
Filter Alert Setting (Enable/Disable)
The Telephone Access Module activates a dial-out alert
if it receives a message from the thermostat (if your
thermostat has this capability) indicating the furnace
filter needs changing or your electronic air cleaner cells
need cleaning.
It is possible to enable or disable the Telephone Access
Module Filter Change Dial-out feature. The factory
default setting is enabled to activate an alert if your filter
change message is received from the thermostat.
After you entered Configuration Number 7, and it is set
to the factory setting, you will hear: "The filter alert is
enabled." If your Filter Alert setting is correct, press the *
key to return to the Configuration Menu.
You will hear, "To change, press 1."
1.
Press 1 to change. You will hear, "Your Filter
Alert Setting is disabled." This means the Tele-
phone Access Module will not activate an alert if
your filter change message is received from the
thermostat.
2.
If this is the Setting you want programmed, press
the * key to return to the Configuration Menu.
If the value entered is not a 1 or the * key, you hear,
"Invalid Setting." Follow the menu and these instructions
to change the filter alert setting or press the * key to exit.
Dial-out Alert Setting (Enable/Disable)
The option to have the Telephone Access Module dial-
out on an alert condition can be disabled. The factory
default setting is enabled to dial out when an alert
condition is observed.
After you enter Configuration Number 8, and it is set to
the factory setting, you will hear, "The Alert Dial-out is
enabled." If your Alert Dial-out setting is correct, press
the * key to return to the Configuration Menu.
You will hear, "To change, press 1."
1.
Press 1 to change. You will hear, "Your Alert Dial-
out is disabled." This means the Telephone
Access Module will not dial-out on an alert condi-
tion.
2.
If this is the setting you want programmed, press
the * key to return to the Configuration Menu.
If the value entered is not a 1 or the * key, you will hear,
"invalid Setting." Follow the menu and these instructions
to change the Alert Dial-out setting or the * key to exit.
19
69-1353
Advertisement
Table of Contents
