Powering Up The System - Cisco UC520-24U-8FXO-K9 Overview

Warning Do not work on the system or connect or disconnect cables during periods of lightning
activity. Statement 1001
To connect the power supply to the UC 520, follow these steps:
Step 1 Connect the AC power cord to the the power supply.
Connect the power interface cable to the power connector port on the back of the unit.
Step 2
7

Powering Up the System

To power up the UC 520, follow these steps:
Verify that the AC power cord is connected to the power supply.
Step 1
Step 2 There is no external Power On/Off switch on the power supply. To power up the power supply
and the UC 520, connect the power cord plug to a grounded AC outlet.
29