Usb Setup - Eicon Networks Diva 2430 User Manual

Setup: USB Setup

USB Setup

Note: The USB port can only be used with systems running Windows 98,
Windows 2000, or Windows Me.
If you are using Windows 98, Windows 2000, or Windows Me, you have the option of
connecting the device to your computer's USB port. This is described in the following
procedure.
Once set up, you can then connect a second computer that supports Ethernet to the
Diva 2430's Ethernet port. To ensure a smooth installation, first install a computer
using one port only, to make sure the device is working properly.
Note: The Diva 2430 does not support USB under Windows 95, Macintosh, or other operating
systems. For these systems, see Ethernet Setup on page 15.
Setup involves the following steps:
Step 1: Connect the Cables ................................................................... 11
Step 2: Install USB Drivers................................................................... 12
Step 3: Test Internet Access.................................................................. 14
Page 10