Table of Contents
Advertisement
2.
Press <R> to rebuild a RAID array. The following screen appears.
RAID Mode: Mirrored
Striping Width: 1
3.
Use the up or down arrow keys to select a RAID array to rebuild, then press
<F7>. The following confirmation message appears.
4.
Press <Enter> to start rebuilding array or press <Esc> to cancel.
5.
After the rebuild process, the Array list menu appears.
You will need to enter Window
complete the rebuilt process.
4-40
Array 4 : NVIDIA MIRROR
- Select Disk Inside Array -
Port
Index
Disk Model
0.0
0
WDC1600AAJS-22PSA0
0.1
1
WDC1600AAJS-22PSA0
[↑↓] Select
[ENTER] OK
149.04G
Striping Block: 64K
[F6] Back
[F7] Finish
Rebuild array?
[ESC] Cancel
®
XP/Vista and run the NVIDIA utility in order to
Capacity
149.05G
149.05G
Chapter 4: Software support
Advertisement
Table of Contents
