Table of Contents
Advertisement
2.3.2
Installing the heatsink and fan
The AMD
Phenom™ FX / Phenom / Athlon™/ Sempron™ processor requires a
Phenom™ FX / Phenom / Athlon™/ Sempron™ processor requires a
®
specially designed heatsink and fan assembly to ensure optimum thermal condition
and performance.
Make sure that you use only AMD-certified heatsink and fan assembly.
To install the CPU heatsink and fan:
1.
Place the heatsink on top of the installed CPU, making sure that the heatsink
fits properly on the retention module base.
•
The retention module base is already installed on the motherboard upon
purchase.
•
You do not have to remove the retention module base when installing the
CPU or installing other motherboard components.
•
If you purchased a separate CPU heatsink and fan assembly, make sure
that a Thermal Interface Material is properly applied to the CPU heatsink or
CPU before you install the heatsink and fan assembly.
CPU fan
CPU heatsink
Retention module base
Your boxed CPU heatsink and fan assembly should come with installation
instructions for the CPU, heatsink, and the retention mechanism. If the
instructions in this section do not match the CPU documentation, follow the
latter.
ASUS M3N WS
Retention bracket
processor requires a
Retention bracket lock
2-7
Advertisement
Table of Contents
