Boot Settings Configuration - Asus M3N WS - Motherboard - ATX User Manual

3.6.3

Boot Settings Configuration

Boot Settings Configuration
Case Open Warning
Quick Boot
Boot Up Floppy Seek
Bootup Num-Lock
Typematic Rate Setting
x Typematic Rate (Chars/Sec)
x Typematic Delay (Msec)
OS Select For DRAM > 64MB
Full Screen LOGO
Halt On
Case Open Warning [Enabled]
Enables or disables the chassis open status feature. Setting to [Enabled] to send
warning messages when the chassis is opened.
Configuration options: [Disabled] [Enabled]
Quick Boot [Enabled]
Allows you to enable or disable the system quick boot feature. When Enabled, the
system skips certain tests while booting.
Configuration options: [Disabled] [Enabled]
Boot Up Floppy Seek [Disabled]
Enable this item to run floppy drives test during POST to determine whether they
have 40 or 80 tracks.
Configuration options: [Disabled] [Enabled]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Typematic Rate Setting [Disabled]
Allows you to set the keystroke rate. Enable this item to configure the Typematic
Rate (Chars/Sec) and the Typematic Delay (Msec) items.
Configuration options: [Disabled] [Enabled]
Typematic Rate (Chars/Sec) [6]
Allows you to select the rate at which a character repeats when you hold a key.
Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]
Typematic Delay (Msec) [250]
Allows you to set the delay before keystrokes begin to repeat.
Configuration options: [250] [500] [750] [1000]
3-36
Phoenix-Award BIOS CMOS Setup Utility
Boot
[Enabled]
[Enabled]
[Disabled]
[On]
[Disabled]
6
250
[Non-OS2]
[Enabled]
[All, But Keyboard]
Select Menu
Item Specific Help
Allows the system to
skip certain tests
while booting. This
will decrease the time
needed to boot the
system
Chapter 3: BIOS setup