Panasonic WXC3010 - CENTER MODULE - MULTI LANGUAGE Operating Instructions Manual page 10

!0 Auxiliary Speaker Volume (AUX, SP)
This control sets the output level of auxiliary speaker.
!1 Auxiliary Microphone Volume (AUX, MIC)
This control sets the input level of gooseneck micro-
phone.
!2 Vehicle Detector Beep Volume (BEEP)
This control sets the vehicle detection beep tone for the
Order Taker or the All-in-One Headset.
!3 POS Audio Volume (POS AUDIO)
This control sets the input level of POS audio.
[OPERATIONAL SETTING]
OUTSIDE
SP
MIC
SPEED
DAY/NIGHT
TEAM
ON:DAY
!5
!4 !6
!4 Speed Team Indicator (yellow) (SPEED TEAM)
This indicates that the speed team mode is on.
!5 Speed Team On/Off Button
This button turns the speed team mode on and off.
!6 Vehicle Detector Beep Day/Night Indicator (yellow)
(BEEP DAY/NIGHT ON:DAY)
This indicates that the vehicle detector beep has select-
ed DAY.
!7 Vehicle Detector Beep Day/Night Button
This button turns the vehicle detector beep DAY and
NIGHT.
Day mode: Disables the vehicle detector beep on the
other lane.
Night mode: Reduces the volume of the vehicle detec-
tor beep on the other lane.
!8 Outside Speaker Level Indicator (yellow) (OUTSIDE
SP LEVEL ON:DAY)
This indicates that the outside speaker level has select-
ed normal level.
!9 Outside Speaker Level DAY/NIGHT Button
This button turns the outside speaker level normal level
and 50% level.
@0 Vehicle Detector Normal/Override On Indicator (yel-
low) (V/DET OVERRIDE)
This indicates that the vehicle detector has selected
Override On.
10
AUX BEEP POS
AUDIO
SP
MIC
OPERATIONAL SETTING
BEEP
OUTSIDE T/P
V/DET
SP LEVEL RELEASE
OVERRIDE
ON:DAY
!7 !9 @1 @2
!8 @0
@1 Vehicle Detector Normal/Override On Button
This button turns the vehicle detector Normal and
Override On.
NORMAL: The vehicle detector turns on only when vehi-
cle is detected at the menu board.
OVERRIDE ON: The vehicle detector is always turned
on.
@2 Talk/Page Release Button (T/P RELEASE)
The button is used to release temporarily the talk/page
communication of the Order Taker or All-in-One
Headset.
[GREETER]
@4
@3
GREETER
ON
@6
SELECT
1 2
@5
HEADSET
PLAYBACK
#2
@3 Greeter On/Off Indicator (yellow) (GREETER, ON)
This indicates that the greeter function has selected on.
@4 Greeter On/Off Button (GREETER, ON)
This button turns the greeter function on and off.
@5 Greeter Memory Select and Output Level Indicator
(green/yellow/red) (SELECT)
This indicates that the greeter memory has been select-
ed. Each memory has a capacity to record a message
for 16 seconds at the maximum.
1: This indicates that the greeter memory has selected
1. (The message of "Please pull forward" is a factory
default.)
2: This indicates that the greeter memory has selected
2.
Off: Greeter is Off.
Green: When the greeter output level set in LOW, the
indicator lights up in green.
Yellow: When the greeter output level set in MID, the
indicator lights up in yellow.
Red: When the greeter output level set in HIGH, the indi-
cator lights up in red.
@6 Greeter Memory Select Button (SELECT)
This button selects either of the greeter memories.
@9
@7 @8 #0
REC
START
DELAY
#1
VOLUME
DOWN UP
DESTINATION
HEADSET
AUX
#4 #5
#3 #6