I Info About Pos Remote Functions - Panasonic WXC3010 - CENTER MODULE - MULTI LANGUAGE Operating Instructions Manual

I Info about POS Remote functions

Remote control becomes possible if any external device is connected to the POS Remote terminal of the center module. To use
the POS Remote functions, POS Remote setup shall be turned ON. (Refer to page 29. )
V/D OUTPUT
POS AUDIO STATE OUTPUT
NIGHT MODE INPUT
OUTSIDE SP LEVEL INPUT
SPEED TEAM INPUT
TALK LOCK RELEASE INPUT
POS AUDIO STATE INPUT
POS AUDIO INPUT
POS AUDIO OUT
30
Functions (Terminal names)
V/DET1 Activated when Vehicle Detector 1 is ON
V/DET2 Activated when Vehicle Detector 2 is ON.
PAGE Activated when a PAGE sound is provided to POS
AUDIO OUT.
Activated when a TALK sound is provided to POS
TALK
AUDIO OUT.
DAY Disables the vehicle detector beep on the other
lane. (To short-circuit the terminals)
NIGHT Reduces the volume of the vehicle detector beep
on the other lane. (To open-circuit the terminals)
DAY Outside speaker volume is normal level.
(To short-circuit the terminals)
NIGHT Outside speaker volume is 50 % level.
(To open-circuit the terminals)
With ON setting, Speed Team mode is assumed.
(ON with the terminals short-circuited )
When turned ON for 1 second, Talk/Page Release
control is carried out. (ON with the terminals short-
circuited )
MANAGER With ON setting, the input sound entered in the
SELECT POS Audio Input circuit can be heard only with the
manager's headset. (ON with the terminals short-
circuited )
PAGE SELECT With ON setting, the input sound entered in the
POS Audio Input circuit can be heard at the head-
set. (ON with the terminals short-circuited )
The sound input from the POS or an external
device is entered.
This sound input is changed over by POS Audio
State Input control.
The sound output is sent to the POS or an external
device. The contents of sound output are reported
by POS AUDIO State Output.
Usage